Installing a rear mounted battery

This is not a complete step by step guide, but will give you an idea of what is involved

	Test fitting the Moroso Battery Box ok, it doesn't fit that well. Some mod will have to be done
	II found that buy heating with a torch I could soften the box and mold it to fit better 3 of the 4 corners has some molding done to them
	The underside mounting rods and plates that come with the kit. It was very hard to find a good location to mount these.
	I had to bend one of the washers to fit the bend in the underside. I later undercoated everything to protect it all
	I I ran the 2Ga cable thru the firewall the cable was run strait down the transmission tunnel



	Wired directly to the starter, along with the stock battery cable and a direct wire to the alternator.
	Top braket mounted and bolted I ran the ground to the passenger seatbelt bolt. I also installed the vent tube.